Why Does Black Mould Keep Coming Back in My Bedroom?

Black mould comes back because wiping it off removes the growth but not the moisture feeding it. In a bedroom that is usually condensation: moist air from breathing overnight settles on a cold wall, corner or window, often where air can't move, such as behind a wardrobe. It stops when the cause is fixed: more ventilation, steadier heat, or a cold spot or leak put right.

Why does mould come back after I clean it?

Because cleaning deals with what you can see, not what caused it. The government's guidance on damp and mould says it plainly: simply removing surface mould will not prevent the damp and mould from reappearing. Mould needs moisture. While the wall keeps getting wet, it grows back, usually in the same place.

So the question isn't which spray to use. It's where the water is coming from. In most bedrooms that is condensation, which the same guidance calls the most common form of damp: moisture made inside the home cools and settles on the colder parts of the building.

Why is it worse in the bedroom?

Three things come together in a bedroom.

<b>Moisture.</b> We all add water to the air through cooking, kettles, showers and even breathing. Energy Saving Trust says a household typically produces up to 100 litres of moisture a week. Overnight, with the door and windows shut, it has nowhere to go.

<b>Cold surfaces.</b> Energy Saving Trust says damp is more likely in places that are colder than the rest of the house, such as exposed corners or gaps in the insulation, and in rooms where the heating is off or low in the colder months.

<b>Still air.</b> Damp also forms where air can't circulate freely, such as behind furniture. A wardrobe tight against an outside wall is the classic spot.

What does the pattern of mould tell you?

Where the mould sits is a clue to the cause. It's a guide, not a diagnosis.

Where the mould isMost likely reasonWhat to check
Behind a wardrobe, bed or drawersAir can't circulate, so the wall behind stays cold and wetIs the furniture tight against an outside wall?
In the corner of two outside wallsAn exposed corner that is colder than the rest of the roomIs the room heated, and does the corner feel cold to the touch?
Along the top of the wall, near the ceilingA gap in the insulation, which Energy Saving Trust says is common at the top of a wallLoft insulation pushed right into the eaves, or cavity insulation that has slumped
Round the window and on the sillCondensation running off cold glassAre the trickle vents open and clear?
One patch that gets worse after rainWater coming in from outside, not condensationGutters, downpipes, roof and pointing above the patch

How do I stop it coming back?

Work on all three causes, starting with the free ones. These steps come from Energy Saving Trust's advice.

  • Keep trickle vents open and clear, and open windows several times a day for at least five minutes.
  • Run extractor fans for at least 15 minutes after a shower, a bath or cooking, so that moisture doesn't drift into the bedrooms.
  • Leave a gap between furniture and the wall.
  • Don't leave the room unheated in cold weather. Heating it from time to time helps. Leaving the heating on all the time just to avoid damp isn't sensible.
  • Get insulation defects fixed. Gaps attract condensation and mould.

How should I clean off the mould that's there?

Energy Saving Trust says to use an antifungal cleaner or a product made to kill mould, with a disposable cloth you throw away afterwards. Wear gloves and a mask. Wipe the mould while it's wet, not dry, so spores don't get into the air. Open the window and keep the door to the rest of the house shut.

The government guidance says mould and mildew products should be used in preference to bleach, and that larger areas of mould should be left to professionals. We can't give medical advice. The guidance says damp and mould mainly affect the airways and lungs, so if anyone at home is struggling with their breathing, speak to your GP.

What if it still comes back?

Then something in the building is keeping that wall cold or wet. A thermal camera shows cold spots, missing insulation and wet patches you can't see by eye. Moisture readings show how wet the wall is. Humidity loggers left in the room for a week or two show when the moisture builds up.

That's what our damp and mould survey does. The report tells you the cause and what to do about it, in order. We survey and report. We don't sell treatments or installs. If the fix needs a trade, we point you to ones we trust, and we always tell you if we receive a referral fee.

If you rent, tell your landlord in writing. The government guidance for landlords says it is unreasonable to blame damp and mould on lifestyle choices, and that the underlying cause has to be dealt with.

Questions

Quick Answers

Does bleach kill black mould for good?

No cleaner does, because the cause is moisture. Government guidance says mould and mildew products should be used in preference to bleach, and that removing surface mould alone will not stop it reappearing.

Is it bad to sleep in a bedroom with mould?

Government guidance says damp and mould mainly affect the airways and lungs, and that children, older people and people with existing health conditions are among those most at risk. Fix the cause, and see your GP if you have symptoms.

Will a dehumidifier stop mould in a bedroom?

It can help, because it takes moisture out of the air. Energy Saving Trust suggests one for excessive moisture. It won't warm a cold wall or fix a leak.

Get it checked

The Checks That Answer This

Keep reading

More From The Blog

All articles

Book

See Where Your Heat Goes

Tell us where you are and what you'd like checked, and we'll come back with a slot. Or call 07367 764156.

We use your details only to arrange your visit. Privacy