Radiator and Underfloor Heating Check
A radiator and underfloor heating check uses a thermal camera to show how evenly your heating is working. It shows radiators cold at the top or bottom, rooms that never warm up, and the layout and cold zones of underfloor heating pipes, so you know whether you need bleeding, balancing or a power flush.
What does a cold radiator mean?
Cold at the top usually means trapped air, which bleeding fixes. Cold at the bottom or in the middle often means sludge, which may need a flush. One radiator hot while another stays cold usually means the system needs balancing.
Can you see underfloor heating pipes?
Yes. When the underfloor heating is running, the pipe loops show up clearly on the camera, along with any zones that aren't heating. It's also the safest way to see where pipes are before drilling or fixing into the floor.

What we look for
What We Check For
Kit: Thermal camera.
- Trapped air in radiators
- Sludge build-up
- Unbalanced radiators and cold rooms
- Underfloor heating pipe layout
- Underfloor zones not heating
- Valves and pipes that aren't working
Questions
Radiator and Underfloor Heating Check Questions
Why is one radiator cold when the rest are hot?
Usually trapped air, a stuck valve or an unbalanced system. The camera shows which, so you're not guessing.
Do I need a power flush?
Only if radiators are cold at the bottom or patchy across the middle, which points to sludge. If they're just cold at the top, bleeding is enough.
Can you check a heat pump system?
We can show how evenly the radiators or underfloor heating are warming up. Settings and servicing are a job for the installer.
Does the heating need to be on?
Yes, running for at least an hour before we arrive, so the whole system is up to temperature.
From the blog
Read Before You Book
Same visit
Add These To Your Check
Book
See Where Your Heat Goes
Tell us where you are and what you'd like checked, and we'll come back with a slot. Or call 07367 764156.