Why Is My House Cold Even With the Heating On?

Usually because heat is escaping faster than the heating can replace it. The common causes are thin loft insulation, draughts round doors and windows, cold bridges at the edges of walls, and radiators that need bleeding or balancing. A thermal camera shows which it is in your house, so you fix the right thing first.

Is the heat escaping, or is the heating not keeping up?

Those are two different problems with two different fixes, so it's worth working out which one you've got before spending anything.

If the radiators are hot but the room still feels cold, or it warms up and then cools quickly once the heating goes off, the heat is getting out. If some radiators are cold at the top, cold at the bottom, or barely warm while others are roasting, the heating system itself needs attention first. Plenty of houses have a bit of both.

The seven common causes, most likely first

  • <b>Thin or missing loft insulation.</b> The Energy Saving Trust recommends at least 270mm of mineral wool in a loft. If you can see the tops of the joists, it's thinner than that.
  • <b>Draughts.</b> Gaps round doors and windows, the letterbox, the loft hatch, between floorboards and up an unused chimney all let warm air out and cold air in.
  • <b>Cold bridges.</b> Where walls meet ceilings, round lintels and in corners, heat finds a shortcut out. These cold strips are also where condensation and mould tend to start.
  • <b>Gaps in wall insulation.</b> Cavity wall insulation can be patchy, missing behind later extensions, or disturbed by building work. From inside the room you'd never know.
  • <b>Radiators that need bleeding or balancing.</b> Cold at the top usually means trapped air. Cold at the bottom can mean sludge. Some hot and some barely warm usually means the system needs balancing.
  • <b>Old or badly fitted windows and frames.</b> Heat is lost through the glass and, just as often, round the frame where it meets the wall.
  • <b>Heating controls in the wrong place.</b> A thermostat in a warm hallway or next to a radiator switches the heating off before the rest of the house is warm.

Checks you can do yourself

None of these need any kit beyond a torch and a tape measure, and they'll tell you a lot before you pay anyone.

CheckWhat you're looking forWhat it suggests
Loft, with a torch and tapeDepth of insulation, gaps, bare patches near the eavesLess than 270mm or patchy: heat loss through the ceiling
Back of your hand round frames on a windy dayA cold draught at the edges of windows, doors and the loft hatchDraught-proofing needed
Radiators, heating onCold at the top, cold at the bottom, or unevenly warm across the houseBleeding, a flush or balancing
Window panesMisting between the two panesA failed double-glazing seal
Ceiling corners on outside wallsGrey or black spottingA cold bridge with condensation forming on it

What a thermal imaging survey adds

A thermal camera shows surface temperature as colour, so a missing patch of insulation, a cold bridge or a draught path shows up as a clear shape rather than a guess. It finds the things you can't get to with a torch, like gaps inside walls or round the edges of a ceiling.

It only works when the inside of the house is much warmer than the outside, which is why we do heat checks in the colder months, with the heating on for a couple of hours before we arrive. You get the pictures, what each one means, and the fixes in order, cheapest and most useful first.

What to fix first

Start with the cheap things that stop the most heat getting out: draught-proofing, topping up the loft, and getting the radiators working properly. Bigger jobs like wall insulation or new windows make sense once you know exactly where the heat is going.

We don't sell insulation or heating work. If you need a trade, we can point you to installers we trust, and we always tell you if they pay us for the introduction.

Questions

Quick Answers

Why is one room colder than the rest of the house?

Usually the room has more outside wall, sits over a garage or under a cold roof space, or its radiator is too small or not getting enough flow. A heating check and a thermal scan of that room will tell you which.

Does a cold house mean I've got damp?

Not on its own, but cold walls and corners are where warm, moist air condenses, and that's what feeds mould. Fixing the cold often fixes the condensation too.

Can I see heat loss with a phone thermal camera?

Clip-on phone cameras will show big differences, like a draughty door, on a cold night. They're low resolution, so smaller gaps and cold bridges are easy to miss or misread.

Get it checked

The Checks That Answer This

Keep reading

More From The Blog

All articles

Book

See Where Your Heat Goes

Tell us where you are and what you'd like checked, and we'll come back with a slot. Or call 07367 764156.

We use your details only to arrange your visit. Privacy